how to clean exit & entrance needles on keurig compact
Keurig coffee machines have found homes in a lot of households because of their topnotch quality and great tasting coffee. With that, they are not the cheapest machines in the market. While they are totally worth it, it does not hurt to put in a little effort to ensure that they last long. One great way to do so is to maintain the machine properly!
But did you know that it's just as important to clean that little Keurig needle? Yes, you heard that right! If you want to learn how to easily clean the part, stick with us!
The needle
What exactly is the needle? This is the needle on top of the brewer that pierces through the coffee pod's foil. The holes it creates allow hot water to flow through the coffee grounds for extraction to take place.
Because of this, the needle is a thriving place for dirt because of the buildup of coffee grounds! Once the needles clog, water will have trouble getting through and may lead to premature wear and tear.
Once you see coffee grounds spitting out of your Keurig, clean the needle ASAP! This could be due to coffee grounds or simply grime clogging the exit needle. This is quite common, so there is no need to be concerned. To resolve this issue, a thorough cleaning of the exit needle is usually sufficient.
How often should you clean your Keurig needle?
Cleaning out the Keurig once a month or so is a good idea. Cleaning your Keurig is an excellent way to ensure that the flavor integrity is maintained. A machine that hasn't been properly cleaned can have an effect on the flavors of your beverages at best, and can even contain bacteria and other nasty things at worst.
Things you need
Fortunately, Keurig 2.0 models come with a brewer maintenance accessory tool to help you clean the needle. If your model is older, you can easily purchase one and it shouldn't cost much. If you want, you may get yourself Keurig's brewer maintenance kit which works well with Keurig 1.0 and 2.0 models.
If you don't have the Keurig's brewer maintenance kit:
- Sponge
- Cloth
- Paperclip
How to use the Keurig maintenance accessory
Sale
Keurig B01MXFTW88 2.0 Needle Cleaning Tool, kkk, Orange
- Keurig 2. 0 Brewer maintenance accessory cleaning tool is for Keurig 2. 0 machines (will not work with other Keurig machines)
- Will not work with other brands of Coffee makers.
- Cleaning tool will only help with Cleaning clogged needles. Will not help with other Coffee maker issues.
- Includes instruction manual
- Genuine Keurig Product
Before you start: Just be aware of the needle 🙂
When changing a Keurig needle, keep in mind that the needles are extremely sharp and capable of piercing skin, as the needle's job is to pierce through pods. So, when cleaning the Keurig needles, be cautious because they can be painful. Also, when cleaning the Keurig needles, make sure the machine is completely unplugged from all power sources, as we don't want anyone getting hurt.
How to clean your Keurig brewer in 10 Steps
Here's a step-by-step guide to cleaning a Keurig needle using Keurig's brewer maintenance accessory tool:
- Turn the Keurig off
For safety purposes, make sure to turn the machine off and unplug it.
- Remove the pod holder
To do so, lift the handle of the Keurig the same way you do when you want to put a K-Cup in. Hold the top of the pod holder with one hand while pushing the pod holder up from below with the other.
- Take the funnel out of the pod holder
Grab the top of the pod holder and the funnel with each hand and pull them apart. The funnel is the piece found at the bottom of the pod holder. If you're having trouble pulling them apart, put them under hot running water to loosen them up.
- Put in a paperclip into the tube at the pod holder's bottom area
Flip the pod holder upside down and insert a straightened paper clip into the small tube at the bottom. Shake it for 20-30 seconds to loosen up clogs. Take note that it's difficult to poke all the way through so it's best not to press hard should you encounter resistance.
- Rinse the pod holder and funnel
With the use of a cloth or a sponge, remove any dirt and grimes to help clean the exit needle. Be careful as the needle can be really sharp. If you prefer to clean the parts in the dishwasher, you may do so! Just make sure to put them on the top rack. Dry the parts completely after.
- Look for the entrance needle under the head of the brewer
Lift the brewer handle again and look for the entrance needle beneath the top part. Be careful as the entrance needle can be very sharp as well.
- Take away unwanted particles from the entrance needle with the use of a paperclip
With the same straightened paper clip, insert it into the openings on both ends of the entrance needle. Likewise, move it around to loosen up any clogs.
- Place the funnel and the pot holder back together
Once completely dry, align the side slots and push both parts together until you hear a click.
- Put the pod holder back into the Keurig
Align the slots on the pod holder and the recipient opening on the machine. Position the pod holder so that the side with 1 tab is on top while the side with 2 tabs is at the bottom. The white arrow found on the rim of the holder should be on top and at the center. Once aligned, push down until you hear a click.
- Run 2 brew cycles with water
Once the machine is closed, put a large mug on the tray and fill the tank with water. Choose the largest cup size and start the brew. Two cycles should be enough!
If you do not have the tool, you can still clean the needle with pretty much the same method.
How to clean the needles in your Keurig Brewer video
Even I am having difficulty with written descriptions of how to clean something and would prefer to see it visually. So here's a detailed video on how to clean a Keurig needle.
Final say
Now that you know how simple it is to clean your Keurig's needle, make sure to never skip it! To keep your machine in its prime condition, be sure to clean, drain, and prime as needed!
If you click on the Amazon link or Add to Cart and make a purchase, we earn a commission at no additional cost to you. Last Update: 2021-12-22
how to clean exit & entrance needles on keurig compact
Source: https://crazycoffeecrave.com/how-to-clean-your-keurig-brewer-needles/
Posted by: edwardshimenclayes.blogspot.com
0 Response to "how to clean exit & entrance needles on keurig compact"
Post a Comment